User guide

E-86
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix E Real-Time Counters
VISM-EndPoint-Connection—Supported Real-Time Counters
All Versions AAL2 Invalid CID
CPS
vismChanAal2CpsInvCidPkts The count of AAL2 CPS packets dropped in the
egress direction due to invalid CID (Channel ID).
The CID may be considered as invalid if - a) It is
out of range. b) It is not configured
All Versions AAL2 Invalid UUI
CPS
vismChanAal2CpsInvUuiPkts The count of AAL2 CPS packets dropped in the
egress direction due to invalid UUI (User-to-User
Info.) field.
All Versions AAL2 Invalid Len
CPS
vismChanAal2CpsInvLenPkts The count of AAL2 CPS packets dropped in the
egress direction due to invalid length field.
All Versions AAL5 Invalid CPI vismChanAal5InvCpiPdus The count of AAL5 PDUs dropped in the egress
direction due to invalid CPI (common part
indicator) field in the AAL5 PDU trailer. This is
applicable only to the PVCs configured as AAL5
PVCs (VoIP PVCs or CCS PVCs in the case of
VoAAL2 application).
All Versions AAL5 Oversized
SDU PDU
vismChanAal5OversizedSdusRc
vdPdus
The count of AAL5 PDUs dropped due to the SDU
size bigger than the configured value. This is
applicable for AAL5 PVCs only.
All Versions AAL5 Invalid Len
PDU
vismChanAal5InvLenPdus The count of AAL5 PDUs dropped due to the
length violations. This is applicable to the CCS
PVCs. The HDLC frames should have a minimum
frame size in order for the proper interpretation by
the upper layer protocol.
All Versions AAL5 PDU CRC32
Errors
vismChanAal5Crc32ErrorPdus The count of AAL5 PDUs dropped in the egress
direction due to CRC-32 errors detected by the
SAR.
All Versions AAL5 Reassembly
Timer Expired
PDU
vismChanAal5ReassemTimerEx
piryPdus
The count of AAL5 PDU reassembly timer
expirations. The timers are maintained in the
egress direction for building an AAL5 PDU from
the cells.
cardVersion
greater or equal
to 3.2.1
24 Hour Peak Xmt
Cell Rate
vismChan24HrPeakXmtCellRate This object counts the peak transmit cell rate (cells
per second) for the channel since midnight with
reference to node time; the peak cell rate counter
gets reset to 0 every 24 hours at midnight. If the
node time is changed, the counter will continue to
gather data until the next time midnight is reached.
cardVersion
greater or equal
to 3.2.1
Current Xmt Cell
rate
vismChanCurrentXmtCellRate This object counts the current transmit cell rate
(cells per second) for the channel.
cardVersion
greater or equal
to 3.2.1
24 Hour Peak Rcv
Cell Rate
vismChan24HrPeakRcvCellRate This object counts the peak receive cell rate (cells
per second) for the channel since midnight with
reference to node time; the peak cell rate counter
gets reset to 0 every 24 hours at midnight. If the
node time is changed, the counter will continue to
gather data until the next time midnight is reached.
Table E-74 Channel Counters (continued)
Applicability Counter Name MIB Object Name Description