User guide

E-80
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix E Real-Time Counters
Common/Card-XgcpPeer—Supported Real-Time Counters
E.27 Common/Card-XgcpPeer—Supported Real-Time Counters
This section includes the following information:
• XGCP Message Counters
All Versions RQNT Fail Count rqntFailCnts Media Gateway
—The total number of RQNT commands
received that were responded to with a failure return
code.
Media Gateway Controller
—The total number of RQNT
commands sent which were timed out without a response
or for which a response with failure return code was
received.
All Versions NTFY Fail Count ntfyFailCnts Media Gateway
—The total number of NTFY commands
sent which were timed out without a response or for
which a response with failure return code was received.
Media Gateway Controller—The total number of NTFY
commands received that were responded to with a failure
return code.
Table E-67 SRCP Peer Counters (continued)
Applicability Counter Name MIB Object Name Description
Table E-68 XGCP Message Counters
Applicability Counter Name MIB Object Name Description
All Versions xgcpSuccessMessages xgcpSuccessMessages This object specifies the count of successful
messages that communicate with the Media
Gateway Controller on that IP address. Successful
messages apply to both transmit and receive
messages. Transmit: Positive ACK is received from
the Media Gateway Controller Receive: Positive
ACK is sent to the Media Gateway Controller. This
implies that the format of the message is correct and
the request can be fulfilled.
All Versions xgcpFailMessages xgcpFailMessages This object specifies the count of failed messages
that communicate with the Media Gateway
Controller on that IP address. Failed messages
apply to both transmit and receive messages.
Transmit: Either NAK is received from the MGC or
message times out waiting for ACK. Receive:
Format of the received message is bad or the request
can not be fulfilled.
All Versions CRCX Count vismXgcpCrcxCnts This refers to the count of CRCX (Create
Connection) messages received from the call agent
since reset.
All Versions CRCX Fail Count vismXgcpCrcxFailCnts This refers to the count of CRCX (Create
Connection) messages received from the call agent
that were responded to with a failure return code.