User guide
E-56
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix E Real-Time Counters
RPM-EndPoint-Connection—Supported Real-Time Counters
E.16 RPM-EndPoint-Connection—Supported Real-Time
Counters
No Real-Time Counters supported for the RPM-EndPoint-Connection
E.17 RPM-ETHERNET-Line—Supported Real-Time Counters
This section includes the following information:
• Category—Interface Counters
• Category—Ethernet Counters
Table E-46 Category—Interface Counters
Applicability Counter Name MIB Object Name Description
All Versions Interface Speed ifSpeed Interface's Current Bandwidth in Bits/Sec
All Versions Received Octets ifInOctets The total number of octets received on the interface,
including framing characters.
All Versions In Ucast Packets ifInUcastPkts The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.
All Versions In Discarded
Packets
ifInDiscards The number of inbound packets which were chosen to
be discarded even though no errors had been detected
to prevent their being deliverable to a higher-layer
protocol. One possible reason for discarding such a
packet could be to free up buffer space. Discontinuities
in the value of this counter can occur at re-initialization
of the management system, and at other times as
indicated by the value of ifCounterDiscontinuityTime.
All Versions In Error Packets ifInErrors For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from
being deliverable to a higher-layer protocol. For
character- oriented or fixed-length interfaces, the
number of inbound transmission units that contained
errors preventing them from being deliverable to a
higher-layer protocol. Discontinuities in the value of
this counter can occur at re-initialization of the
management system, and at other times as indicated by
the value of ifCounterDiscontinuityTime.