User guide

E-11
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix E Real-Time Counters
AXSM-DS3-Line—Supported Real-Time Counters
cardFamily not
equal to AXSM
AND cardFamily
not equal to AXSME
AND cardFamily
not equal to
AXSMXG AND
cardFamily not
equal to PXM1E
AND cardFamily
not equal to MPSM
CPE Count cds3CPECount The number of C-bit parity
errors(CPERR) on a DS3
interface. This value is
calculated over noninformation
bits in the DS3 frame.
cardFamily not
equal to AXSM
AND cardFamily
not equal to AXSME
AND cardFamily
not equal to
AXSMXG AND
cardFamily not
equal to PXM1E
AND cardFamily
not equal to MPSM
FEBE Count cds3FEBECount The number of Far End Block
Errors(FEBE) encountered by a
T3/E3 interface.These include
frame alignment errors,
multiframe alignment errors, and
C-bit parity errors. These errors
are generated by the transmitter
at the far end, and indicate that
the transmitter,cabling or the
upstream node is faulty.
cardFamily not
equal to AXSME
AND cardFamily
not equal to
AXSMXG AND
cardFamily not
equal to PXM1E
AND cardFamily
not equal to SRM
AND cardFamily
not equal to MPSM
AIS Count cds3RcvAISCount The number of times Alarm
Indication Signals(AIS) were
detected. The AIS indicates that
an upstream failure has been
detected by the far end.
Table E-8 PLCP Counters—cardFcType not equal to 160
Applicability Counter Name MIB Object Name Description
All Versions CurrentBIP-8CV cds3PlcpBip8CVCurrent The number of BIP-8 code
violations (CV) encountered by
the line in the current 15 minute
period.
All Versions Current24HrBIP-8CV cds3PlcpBip8CV24HrBucket The number of BIP-8 CVs
encountered by the line in the
last 24 hours.
Table E-7 Line Alarm Statistics (continued)
Applicability Counter Name MIB Object Name Description