User guide

D-51
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix D Statistics Summary
Physical Line Statistics
D.8.1 AXSM-E T1/E1 Physical Line
This section provides information about the statistics contained in the AXSME_Phyline_T1E1 group.
The AXSM-E T1/E1 physical line statistics in this group are applicable to the
Cisco MGX 8850 PXM45-based switch.
Table D-43 lists the attributes that are common to the AXSM-E T1/E1 physical line statistics.
The AXSM-E T1/E1 physical line statistics are used primarily for gathering troubleshooting and
performance data.
Table D-44 includes the description of each statistic and the point during the data flow at which the
statistic gathers the appropriate information. Each measurement point refers to the corresponding point
in Figure 1.
Note AXSM-E statistics are only collected at measurement points 1, 2, and 13.
Table D-43 Attributes Common to all AXSM-E T1/E1 Physical Line Statistics
Object Attribute
Front Card AXSM-16-T1E1-E
Back Cards RJ48-8-T1-Y, SMB-8-E1
Object Type 11
Subobject Type 3
Allowable Peak Intervals 60 seconds, 300 seconds
Default Peak Interval 300 seconds
Table D-44 AXSM-E T1/E1 Physical Line Statistics—Descriptions
Stat
ID
AXSM-E T1/E1 Physical
Line Statistics
Subset of Other
Statistics
Ingress/Egress
Measurement Point Description
0 Errored Seconds — — Provides a count of the line code violation
errored seconds.
Range: 0 to (2
32
–1)
1 Severely Errored Seconds — — Provides a count of the line code violation
severely errored seconds (SES) that are
encountered by the interface.
Severely errored seconds are classified as
errored seconds that are greater than the total
line bits per second multiplied by 10
-6
.
Range: 0 to (2
32
–1)
2 Severely Errored Framing
Seconds
No Ingress–1 Provides a count of the severely errored framing
seconds that occur within the collection interval
on the T1/E1 line.
Range: 0 to (2
40
–1) cells