User guide

D-47
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix D Statistics Summary
Protocol Statistics
D.7.3 VXSM Megaco Ephemeral Termination Protocol Statistics
This section provides information about the statistics contained in the
VXSM_PROTO_MEGACO_EPHE_TERM group. The VXSM Megaco ephemeral termination protocol
statistics are applicable to the VXSM cards on the Cisco MGX 8880 PXM45-based nodes and the
Cisco MGX 8850 PXM45-based nodes.
Table D-39 lists the attributes that are common to all of the VXSM card statistics.
Table D-40 includes the VXSM Megaco ephemeral termination protocol statistics.
Table D-38 VXSM Megaco Physical Termination Protocol Statistics—Descriptions
Stat
ID
VXSM Megaco Physical
Termination Protocol
Statistics
Subset of Other
Statistics
Ingress/Egress
Measurement Point Description
0 Total physical termination
ADD commands
— — Provides a count of the total number of ADD
commands that have been initiated.
Range: 0 to (2
64
–1)
1 Total failed physical
termination ADD commands
— — Provides a count of the total number of ADD
commands that have failed.
Range: 0 to (2
64
–1)
2 Out of service from MGC — Ingress–1 Provides a count of the total number of.out of
service messages received from the Media
Gateway Controller (MGC).
Range: 0 to (2
64
–1)
3 Out of service from OAM — Ingress Provides a count of the total number of.out of
service messages triggered by the OAM
process.
Range: 0 to (2
64
–1)
Table D-39 Attributes Common to all VXSM Card Statistics
Object Attribute
Front Card VXSM
Back Card VXSM-BC-4-155
Object Type 8
Subobject Type 2
Default Peak Interval 300 seconds