User guide

D-42
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix D Statistics Summary
PNNI Network Statistics
The PNNI node statistics are used for gathering information about SPVCs and SPVPs.
Note To collect PNNI SPVC and SPVP statistics in Cisco MGM, first enable the statistics on the switch by
executing the CLI command cnfpnstat.
Table D-32 includes the description of each statistic and the point during the data flow at which the
statistic gathers the appropriate information. Each measurement point refers to the corresponding point
in Figure 1.
D.6.2 PNNI Port Statistics
This section provides information about statistics contained in the PNNI_Port_Level group. The PNNI
port statistics are applicable to the Cisco MGX 8950, Cisco MGX 8850 PXM45-based,
Cisco MGX 8850 PXM1E-based, and Cisco MGX 8830 switches.
Table D-33 lists the attributes that are common to the PNNI port statistics.
The PNNI port statistics are used for gathering information about SPVCs and SPVPs.
Note To collect PNNI SPVC and SPVP statistics in Cisco MGM, first enable the statistics on the switch by
executing the CLI command cnfpnstat.
Table D-34 includes the description of each statistic and the point during the data flow at which the
statistic gathers the appropriate information. Each measurement point refers to the corresponding point
in Figure 1.
Table D-32 PNNI Node Statistics—Descriptions
Stat
ID PNNI Node Statistics
Subset of Other
Statistics
Ingress/Egress
Measurement Point Description
0 Con success at orig node — — Provides a count of the successful
connections at the originating node.
1 Con failed at orig node — — Provides a count of the failed connections at
the originating node.
Table D-33 Attributes Common to all PNNI Port Statistics
Object Attribute
Front Cards PXM45, PXM1E-16T1E1
Back Cards 16 Port T1E1 RJ48, 16 Port E1 MCC
Object Type 7
Subobject Type 1
Collection Interval 15 minutes
Default Peak Interval Not supported