User guide

4-6
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 4 Building the Network
How Do I Add and Delete Network Elements?
Table 4-1 Field Descriptions for the Add Network Element(s) Wizard
Screen Field Description
NE
Addition
NE Model Allows you to select the NE model (Cisco MGX 8880/Cisco MGX 8850).
NE Type The NE Type is not available.
NE Addition Select Single NE Addition to add only one NE. Select Bulk NE Addition to add several
NEs simultaneously. The available fields will change, depending on which item you
select.
IP Address (for single
NE additions)
Allows you to enter a unique IP address for the NE. It must be in the form
ddd.ddd.ddd.ddd, where ddd is a decimal octet expressed as an integer between 0 and
255. The first octet cannot be a zero.
Note Prior to the NE ID discovery, Cisco MGM uses the NE IP address as a
temporary NE ID.
Note The IP address field is unavailable when adding Not Managed/Other Vendor
NEs.
From IP Address (for
bulk NE additions)
Enter the beginning IP address for the range of NEs you want to add.
To IP Address (for bulk
NE additions)
Enter the ending IP address for the range of NEs you want to add. Click Add to add the
range to the Select IP field.
IP Address Selection Select one or more IPs in the Deleted IP field and click Add to add them to the Selected
IP field. Select one or more IPs in the Selected IP field and click Remove to remove
them from the Selected IP field. Only the IPs in the Selected IP fields are affected by
clicking Next.