User guide

D-34
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix D Statistics Summary
Path Statistics
D.5.2 VXSM DS3 Path Statistics
This section provides information about the statistics contained in the VXSM_DS3 Path group. The
VXSM DS3 path statistics are applicable to the VXSM cards on the
Cisco MGX 8880 PXM45-based nodes and the Cisco MGX 8850 PXM45-based nodes.
Table D-25 lists the attributes that are common to all of the VXSM DS3 path statistics.
Table D-26 includes the description of each statistic.
Table D-25 Attributes Common to all VXSM DS3 Path Statistics
Object Attribute
Front Card VXSM
Back Card VXSM-BC-4-155
Object Type 6
Subobject Type 3
Default Peak Interval 300 seconds
Table D-26 VXSM DS3 Path Statistics—Descriptions
Stat
ID VXSM DS3 Path Statistics
Subset of Other
Statistics
Ingress/Egress
Measurement Point Description
0 LOF count — — Provides a count of the loss of frames (LOFs)
on the DS3 path.
Range: 0 to (2
64
–1)
1 Remote AIS Count — — Provides a count of the remote alarm
indication signal (AIS) instances on the DS3
path.
Range: 0 to (2
64
–1)
2 Remote Defect Count — — Provides a count of the remote defect
indications (RDIs)/yellow alarms that occur
on the DS3 path.
Range: 0 to (2
64
–1)
3 P-bit Code Violations for Path — — Provides a count of the P-bit code violations
(CVs) for the DS3 path.
Range: 0 to (2
64
–1)
4 C-bit Code Violations for Path — — Provides a count of the C-bit code violations
(CVs) for the DS3 path.
Range: 0 to (2
64
–1)
144 FEBE Counts — — Provides a count of the FEBEs ( far-end block
errors) that are encountered by the DS3 path.
Range: 0 to (2
32
–1)