User guide

4-5
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 4 Building the Network
How Do I Add and Delete Network Elements?
4.2.3.2 Adding Multiple Network Elements
From the Domain Explorer, you can add multiple NEs
Step 1 Select a node in the Domain Explorer; then, choose File > Add Network Element(s). You can also click
the Add Network Element(s) tool. The Add Network Element(s) wizard appears. See Figure 4-1.
Note You cannot add a new NE to the Discovered Network Elements or Deleted Network Elements
group.
Step 2 Enter the following information (see Table 4-1 for more details):
a. NE Model
b. NE Type
c. NE Addition—(not available with Not Managed/Other Vendor NEs)—Click the Bulk NE Addition
radio button
d. IP Address Range—Enter the IP addresses in the From and To fields of the NE and click Add
e. IP Address Selection—Add or remove IP addresses using the Add and Remove buttons.
Step 3 Click Next.
Note If you click Finish in this window, default values will be assigned to the remaining fields.
Step 4 Enter the following information:
a. NE ID—Display only.
b. Operational state
c. SNMP community string
d. NE Service Level User Name
e. NE Service Level Pass Word
f. Description
Step 5 Click Finish.
Step 6 Select the grouping option for the NEs.
Step 7 Click Finish to add the NEs to the Domain Explorer tree.
Wait two to five minutes while the Cisco MGM server completes the node discovery.