User guide

D-22
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix D Statistics Summary
Port Statistics
D.3.2 AXSM-E Port
This section provides information about the statistics contained in the AXSME_ATM_port group. The
AXSM-E port statistics in this group are applicable to the Cisco MGX 8850 PXM45-based switch.
Table D-17 lists the attributes that are common to the AXSM-E port statistics.
The AXSM-E port statistics are used primarily for gathering troubleshooting and performance data.
Table D-18 includes the description of each statistic and the point during the data flow at which the
statistic gathers the appropriate information. Each measurement point refers to the corresponding point
in Figure 1.
Note AXSM-E statistics are only collected at measurement points 1, 2, and 13.
Table D-17 Attributes Common to all AXSM-E PortStatistics
Object Attribute
Front Cards AXSM-2-622-E, AXSM-8-155-E, AXSM-16-T3E3-E
Back Cards SMFLR-1-622, SMFIR-1-622, SMFLR-4-155, SMFIR-4-155,
MMF-4-155, SMB-4-155, SMB-8-T3, SMB-8-E3
Object Type 3
Subobject Type 11
Allowable Peak Intervals 60 seconds, 300 seconds
Default Peak Interval 300 seconds
Table D-18 AXSM-E Port Statistics—Descriptions
Stat
ID AXSM-E Port Statistics
Subset of Other
Statistics
Ingress/Egress
Measurement Point Description
0 CLP0 cells transmitted No After 13 Provides a count of the cells with CLP equal to 0
that are transmitted to the port.
Range: 0 to (2
40
–1) cells
1 CLP1 cells transmitted No After 13 Provides a count of the total cells with CLP equal
to 1 that are transmitted to the port.
Range: 0 to (2
40
–1) cells
2 OAM cells transmitted No After 13 Provides a count of the operation, administration,
and maintenance (OAM) cells that are transmitted
to the port.
Range: 0 to (2
40
–1) cells
3 RM cells transmitted No After 13 Provides a count of the resource management
(RM) cells that are transmitted to the port.
Range: 0 to (2
40
–1) cells