User guide

D-14
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix D Statistics Summary
Service Line Statistics
D.2.3 AXSM Line
This section provides information about the ATM line statistics contained in the AXSM_ATM_line
group. The AXSM ATM line statistics are applicable to the Cisco MGX 8850 PXM45-based switch.
Table D-11 lists the attributes that are common to all of the AXSM line statistics.
The AXSM line statistics are used primarily for gathering billing data.
Table D-12 includes the description of each statistic and the point during the data flow at which the
statistic gathers the appropriate information. Each measurement point refers to the corresponding point
in Figure 1.
240 Sonet Line Alarm indication
signal
— — Provides a count of the times that an alarm
indication signal is detected on the line.
Range: 0 to (2
32
–1)
241 Sonet Line Remote Far end
Indicatn
— — Provides a count of the remote failure
indications (RFIs) that are encountered by a
SONET line.
Range: 0 to (2
32
–1)
Table D-10 SRM and SRME SONET Line Statistics—Descriptions (continued)
Stat
ID
SRM and SRME SONET Line
Statistics
Subset of Other
Statistics
Ingress/Egress
Measurement Point Description
Table D-11 Attributes Common to all AXSM Line Statistics
Object Attribute
Front Card MGX-AXSM-16-T3E3, MGX-AXSM-16-155, MGX-AXSM-4-622,
MGX-AXSM-1-2488
Back Cards MGX-SMB-8-T3, MGX-SMB-8-E3, MGX-SMB-4-155,
MGX-SMFIR-8-155, MGX-SMFLR-8-155, MGX-MMF-8-155,
MGX-SMFLR-2-622, MGX-SMFIR-2-622, MGX-SMFSR-1-2488,
MGX-SMFLR-1-2488, MGX-SMFXLR-1-2488
Object Type 1
Subobject Type 11
Default Peak Interval 300 seconds