User guide

12-4
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 12 Managing CORBA Interfaces
Using a Static CORBA Listener Port on the Cisco MGM Server
12.1.2 Viewing the Cisco MGM GateWay/CORBA Client Configuration Table
The Cisco MGM GateWay/CORBA Client Configuration Table displays information about Operations
Support System (OSS) CORBA client properties. To view the Cisco MGM GateWay/CORBA Client
Configuration table, from the Domain Explorer window, choose Administration > Control Panel, then
choose Administration > Cisco MGM GW/CORBA Client Configuration Table.
12.2 Using a Static CORBA Listener Port on the Cisco MGM
Server
To use a static CORBA listener port on the Cisco MGM server, proceed as follows.
Step 1 Log into the Cisco MGM server workstation as the root user.
Step 2 Change the directory to /opt/CiscoMGMServer/bin.
Note The default directory /opt/CiscoMGMServer may have been changed during installation of the
Cisco MGM server.
Step 3 Edit the jne454.sh file by inserting a new line before the -Xbootclasspath line:
-Dong.orb.iioplistenerport= Port Number \
For example, if the port number is 5555, enter:
-Dong.orb.iioplistenerport=5555 \
Step 4 Start the Cisco MGM server.
12.3 Configuring the CORBA Timeout
The CORBA timeout determines the number of seconds that the Cisco MGM server has to process a
CORBA call and return it to the Cisco MGM client. If the Cisco MGM server does not return a response
in time, CORBA automatically times out.
Step 1 Open the ems-client.cfg file.
By default, the ems-client.cfg file is located in the C:\Cisco\MediaGatewayManagerClient\config
directory for Windows platforms and in the /opt/CiscoMGMClient/config directory for Sun Solaris
platforms.
Table 12-3 Field Descriptions for Cisco MGM GateWay/CORBA Client Configuration Table
Column Name Description
OSS Name Displays the name of the selected OSS client.
IP Address Displays the IP address of the OSS client.