User guide

10-19
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 10 Managing Performance
What Types of Data Reports Are Available?
Figure 10-4 Statistics Report Window—Performance Data Report
10.5.3.3 Displaying Performance Data Report for a Port
After you finished generating the Performance Data Report (see 10.5.3.2 Generating the Performance
Data Report for a Port), you must ensure that the graphical information is correct. For example, you must
verify that the report shows the correct port object identifier according to the entity label specifications.
To display the graphical representation of the Performance Data Report at the port level:
Step 1 Verify the performance data information by using the formulas. For information about the formulas for
a port, see Table 10-8.
The performance data information for the port is displayed.
Step 2 Click Close to close the report summary.
10.5.3.4 Generating the Performance Data Report for Connections
You can also select a port in the Statistics Report and retrieve all the connections for the port. All the
connection data reports are retrieved for the Raw Data Report, Utilization Data Report, and Performance
Data Report at the same time.
To generate the Performance Data Report for connection endpoints:
Step 1 In Domain Explorer, select the node and choose Configuration > MGX 8880/8850 MG >
Configuration Center.
Step 2 In Configuration Center, click the Connections tab.