User guide

9-27
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 9 Managing Faults
Is the Service Working?
Figure 9-9 Diagnostic Center—Reliable User Datagram Protocol for Voice Card
9.4.13.3 Displaying the Status for Xternal Gateway Control Protocol for the Voice Cards
Note A session of the type of object must be available before it can be polled.
To display the Xternal Gateway Control Protocol (XGCP) for VXSM card for both SONET and T1E1
lines:
Step 1 In the Diagnostic Center, click the Elements tab, and double-click or drag the VXSM card from the
Hierarchy pane to the right hand pane to display the diagnostics at the card level. See Figure 9-9.
Step 2 Click the VXSM Features tab.
Step 3 Choose the XGCP MGC option from the drop-down arrow.
Step 4 Verify the following XGCP peer group parameters:
• MGC Group Number—Specifies the media gateway controller number. The range is from 1-8.
• Gateway IP Address—The Gateway IP Address Index parameter defines the media gateway
address that relates to the PVC control type. The range is from 1-16.
• Protocol Index—Specifies the media gateway protocol number. The range is from 1-3.
• Gateway UDP Port—Specifies the Gateway User Datagram Protocol (UDP) port.
Step 5 Click the Delta Mode radio button or Absolute Mode radio button. See Table 9-6.