User guide

9-25
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 9 Managing Faults
Is the Service Working?
Step 3 Verify the following parameters for the path:
• Line Number
• Loopback Type
Step 4 Click the Delta Mode radio button or Absolute Mode radio button. See Table 9-6.
Step 5 Choose the polling interval time from the Poll Interval (Sec) drop-down arrow.
Step 6 Verify the statistics name and statistics value for the real-time counters.
Step 7 Check the Poll All check box to initiate polling for the statistics. To select individual counters for
polling, check the counter check box.
Step 8 Click Refresh to update the settings for the lines in loopback for VXSM.
9.4.13 Managing the Status for the VXSM Features
These tasks are used to manage the status for the VXSM features:
• 9.4.13.1 Displaying the Status for Media Gateway Links for the Voice Cards
• 9.4.13.2 Displaying the Status for Reliable User Datagram Protocol for the Voice Cards
• 9.4.13.3 Displaying the Status for Xternal Gateway Control Protocol for the Voice Cards
9.4.13.1 Displaying the Status for Media Gateway Links for the Voice Cards
Note A session of the type of object must be available before it can be polled.
To display the Media Gateway Links (MGL) for voice cards for both SONET and T1E1 lines:
Step 1 In the Diagnostic Center, click the Elements tab, and double-click or drag the VXSM card from the
Hierarchy pane to the right hand pane to display the diagnostics at the card level.
Step 2 Click the VXSM Features tab and choose Media Gateway Links from the drop-down box.
Step 3 Verify the following parameters for the path:
• Gateway Link ID
• Gateway IP Address
• Gateway Port
• Control Protocol
• Gateway Link Operational State
Step 4 Click the Delta Mode radio button or Absolute Mode radio button. See Table 9-6.
Step 5 Choose the polling interval time from the Poll Interval (Sec) drop-down arrow.