User guide

9-24
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 9 Managing Faults
Is the Service Working?
Step 4 Click the Delta Mode radio button or Absolute Mode radio button. See Table 9-6.
Step 5 Choose the polling interval time from the Poll Interval (Sec) drop-down arrow.
Step 6 Verify the statistics name and statistics value for the real-time counters.
Step 7 Check the Poll All check box to initiate polling for the statistics. To select individual counters for
polling, check the counter check box.
Step 8 Click Refresh to update the settings for the lines in loopback for VXSM.
Figure 9-8 Diagnostic Center—Bit Error Rate Test
9.4.12 Displaying the Lines in Loopback for the Voice Cards
To display the lines in loopback for the VXSM card for both SONET and T1E1 lines and the VISM-PR
cards:
Step 1 In the Diagnostic Center, click the Elements tab, and double-click or drag the VXSM or VISM-PR card
from the Hierarchy pane to the right hand pane to display the diagnostics at the card level. See
Figure 9-7.
Step 2 Click the Lines In Loopback tab.