User guide

9-18
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 9 Managing Faults
Is the Service Working?
Step 3 Click Save.
9.4.4 Displaying the Status of all Nodes in the Network
To display the status of all nodes in the network:
Step 1 In the Diagnostic Center, click the Elements tab, and double-click or drag the network to the right hand
pane to display the diagnostics at the network level. By default, the Diagnostics tab is selected in the
right hand pane.
Parameter Name
(continued)
• Sync-up Failed
• Stats File Error
• Stats File Transfer Error
• SNMP Throttle Error
• Backoff failed
• SNMP timeout
• FTP Session timeout
• FTP Transfer timeout
• Unknown Error
• Initialization Error
• Configuration Error
• Communication Error in ILOG
• Communication Error in shared memory
• Communication Error in CORBA
• NTS Registration failed
• NTS Trap loss
• DataBroker Sync-Up Complete
• Process Restarted
• PM Fail EMS Alarm
• PM Lost EMS Alarm
Severity Allows you to click in the appropriate cell and select the alarm severity level
from the available options (Critical, Major, Minor, or Warning) for each of
the corresponding parameters listed in the Parameter Name column. If an
EMS alarm is outstanding when you change its severity, the outstanding EMS
alarm's severity remains the same. The next time the alarm is raised, the
severity changes to the new setting.
Table 9-5 Alarm Configuration—Non-Threshold EMS Alarm Tab (continued)
Field Description