User guide

1-7
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 1 Introduction
A Typical Workflow in Cisco MGM
To stop the Cisco MGM server:
Step 1 Log into the Cisco MGM server workstation as the root user.
Step 2 On the command line, enter the following:
mgms-stop
1.4.2 Adding a User
When Cisco MGM is installed, the System Administrator must create users, who can then perform tasks
such as adding network elements.
To add a new Cisco MGM user, go to the Domain Explorer window and choose
Administration > Cisco MGM Users. In the Cisco Media Gateway Manager Users window, click the
Create a New User tool, or choose Edit > Create. Follow the prompts to create a new user.
Note You must set the appropriate user privilege for each new user.
1.4.3 Adding a New Group
Groups are a collection of groups or collection of NEs. NEs are often grouped geographically or by
domain. Groups can be used to organize the domain into a hierarchy. A Network Map can be opened for
a group.
After installing the Cisco MGM server and client, complete the following steps:
Step 1 Log into the Cisco MGM client with the appropriate user access profile.
Step 2 In the Domain Explorer window, click the Add a New Group tool, or choose File > New Group and
add one or more groups to the tree:
a. Enter a group ID.
b. Enter a group location.
c. Enter a group description.
d. Click OK.