User guide

8-27
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 8 Managing Security
How Do I Manage User Security?
8.3.4.12 Enabling or Disabling the Continuous Audible Alarm
You can enable or disable the continuous audible alarm, which can be enabled to sound when a specific
alarm or event of a specific severity occurs on an NE or on the system.
Step 1 In the Domain Explorer window, choose Edit > User Preferences. The User Preferences dialog box
opens.
Step 2 In the Event Notification tab > Play Audible Notification For area, check the Continuous Alarm For
Dashboard Notifications check box.
Step 3 Click OK.
Step 4 To disable the continuous audible alarm, choose Fault > Stop Continuous Beep in the Domain Explorer
window.
Miscellaneous Time Zone for
Date/Time Display
Change the time zone selection. You can select one of the following:
• Local—Displays time information adjusted for the time zone that is
configured on the PC or workstation where the Cisco MGM client is running.
• GMT—Displays time information (for example, alarm time stamps)
according to the GMT time zone.
• User Defined—Specify a fixed offset from GMT. The offset range is –12 to
+13 hours from GMT, in one-hour increments. For offsets other than zero,
specify a display string of four characters maximum (to indicate the time
zone, for example).
Display Log/15-min
PM Data
Change the time period used to display time-sensitive data in 15-minute
increments.
Note This field is visible only if you have read permission for the Performance
Monitor operation.
Display 1 Day PM
Data
Change the time period used to display time-sensitive data in 24-hour increments.
Note This field is visible only if you have read permission for the Performance
Monitor operation.
Don’t Display User
Profile Creation
Warning Messages
Enable or disable the warning dialog box that pops up when you click Finish after
creating or modifying a user profile. The warnings are still visible in the User
Profile table.
Map Preferences Open Network Map in
New Window
Within network map views, this setting specifies whether to open subsequent
frames in the same window, or open a new window for subsequent map views.
Show Off View Icons This option is available in the GUI, but is not used by Cisco MGM.
FM Preferences Color Entire Row in
Table View
Set the Alarm Browser or Alarm Log to full background color for the entire
selected row. The color corresponds to the alarm status and severity.
Table 8-15 Field Descriptions for the User Preferences Dialog Box (continued)
Tab Field Description