User guide

8-3
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 8 Managing Security
How Do I Manage User Security?
Table 8-2 lists the access privileges required to perform security-controlled operations within the
Diagnostic Center application.
Table 8-1 Configuration Center Access Privileges
Access Privilege Operation
Read Enables the following read operations:
• Reads the element attributes.
• Reads the templates and loads the template parameters into the configuration internal frame.
Read/Write Enables the following create operations:
• Changes the attribute values in a create internal frame.
• Commits changes on the switch.
• Saves the attribute values into a new template.
Enables the following modify operations:
• Changes the attribute values in a details internal frame.
• Commit changes on the switch.
• Saves the attribute values into an existing template.
• Selects and modifies the template with the new attribute values.
Enables the Delete button in both the details and create internal frame only after the element is created.
Also in the tabular view listing, when more than one element is selected and if you click Delete, an
extra check verifies if the multiple delete permission is enabled, If not, you are blocked from
attempting the operation and prompted to delete one element at a time.
Specifies that the tabular view listing allows more than one element decision. The multiple delete
operation means that the single delete operation is also enabled. The other delete permissions are also
applicable.
No Access User has no access permissions.
Table 8-2 Diagnostic Center Access Privileges
Access Privilege Operation
Read Enables get connections, test connections, connection trace, and trouble tickets
attachment.
Read/Write Enables up connections, and saves trouble tickets.
Enables the following operations at different levels:
• Node—Specifies node resync and checks manageability.
• Line and path—Applies loopback and starts and modifies BERT
1
.
• Port—Starts and modifies BERT and grooming functions.
• Connections—Specifies loopback connections.
1. BERT = Bit Error Rate Test
No Access User has no access permissions.