User guide

7-9
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 7 Provisioning Connections
How Do I Create, Modify and Delete Voice Connections?
7.4.2 Modifying a Connection in Connection Mode
You have two options to modify a connection for VXSM and VISM-PR cards:
• 7.4.2.1 Modifying a Connection in Advanced Mode
• 7.4.2.2 Modifying a Connection in Quick Mode
7.4.2.1 Modifying a Connection in Advanced Mode
To modify a connection in Advanced Mode:
Step 1 In the Configuration Center, click the Connections tab to display the Connections Hierarchy pane. Select
the NE, and double-click, or drag and drop the NE into the right-hand pane to display the New
Connection details.
Step 2 Click the Connection List tab to display the list of connections.
Step 3 Move the node along with the active port to the Local End ID field.
Step 4 Enter the number of connections you want to retrieve in the Connection Count to be retrieved field.
To retrieve all connections, enter *. By default, * is displayed.
Step 5 Click Get to display all connections and the status of connections for the selected node.
Step 6 Select a VISM-RPM connection type from the list of connections. Note that connections with a status of
incomplete or error cannot be selected.
Step 7 Click Details. The Connection Details window for the connection type opens.
Step 8 Change to the values you require or use a template for the local endpoints, remote endpoints. Ensure the
connections are correct in the Connection Details window.
Step 9 Click OK to modify the attributes in the Connection Details window.
Step 10 Click Modify to modify the parameters.
7.4.2.2 Modifying a Connection in Quick Mode
To modify a connection in Quick Mode:
Step 1 In the Configuration Center, click the Connections tab to display the Connections Hierarchy pane. Select
the NE, and double-click, or drag and drop the NE into the right-hand pane to display the New
Connection details.
Step 2 Click the Connection List tab to display the list of connections.
Step 3 Move the node along with the active port to the Local End ID or Remote End ID field.
Step 4 Enter the number of connections you want to retrieve in the Connection Count to be retrieved field.
To retrieve all connections, enter *. By default, * is displayed.
Step 5 Click Get to display all connections and the status of connections for the selected node.
Step 6 Select a VISM-RPM connection type from the list of connections. Note that connections with a status of
incomplete or error cannot be selected.
Step 7 Click Details. The Connection Details window for the connection type opens.