User guide

6-183
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
6.9.4.6.3 Associating an Endpoint With a CAS Variant
For details, refer to section 6.9.4.5.3 Configuring DS0 Parameters, page 6-177.
6.9.4.7 Placing the VISM-PR Card In or Out of Service
Placing the VISM-PR card out of service informs the call agent to not send any call requests to the
VISM-PR card.
Step 1 From the Domain Explorer window, choose Configuration > MGX 8880/8850 MG > Configuration
Center.
Step 2 Under the Elements tab, within the node, double-click the VISM-PR card.
Step 3 Click the Media Gateway tab.
Step 4 Choose the Gateway State option from the Category drop-down arrow.
Table 6-81 Field Descriptions for the VISM-PR CAS Backhaul Management Tab
Field Name Description
Variant Name String identifier for the CAS variant, used as an index to the table.
File Name Name of the fiel that contains the signal definition and the Finite State
Machine definition for the CAS variant.
Max TimeOut Maximum timeout value in milliseconds, used for re-transmitting
unacknowledged XGCP messages at the call agent CAS/PBX interface.
Init TimeOut Initial timeout value in milliseconds, used for re-transmitting
unacknowledged XGCP messages at the call agent CAS/PBX interface.
Retries Specifies the number of retries for a message that exceeds
vismCasXgcpMaxReXmitTime or vismCasXgcpInitialReXmitTime.