User guide

6-182
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
6.9.4.6.2 Configuring the CAS Variant and Timing Parameters
Step 1 From the Domain Explorer window, choose Configuration > MGX 8880/8850 MG > Configuration
Center.
Step 2 Under the Elements tab, within the node, double-click the VISM-PR card.
Step 3 Click the CAS tab. Choose the CAS Backhaul Extension option from the Category drop-down arrow.
Step 4 Within the variant table, click on the variant you want to configure, then click Details.
Step 5 Click Create. The CAS Backhaul Management tab appears.
Figure 6-96 Configuration Center—VISM-PR CAS Backhaul Management Tab
Step 6 Complete the fields.
Note Table 6-81 describes fields in the VISM-PR CAS Backhaul Management tab.
Step 7 Click Apply to configure the CAS variant and timing parameters.
Config Status Configuration status of the CAS variant.
Variant Source Specifies where the file defining this CAS variant resides.
Table 6-80 Field Descriptions for the VISM-PR Create CAS Parameters Window (continued)
Field Name Description