User guide

6-176
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Figure 6-93 Configuration Center—VISM-PR Create Endpoints Config Window
Step 5
Complete the fields.
Note Table 6-78 describes fields in the VISM-PR Create Endpoints Config window.
Step 6 Click Apply to add the DS0 endpoint to the line.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.