User guide

6-172
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
RUDP Session Session Number Index for this table. One group can have a maximum of
four sessions.
Session Group Number A mandatory parameter if session type is backhaul,
indicates the session group that this session belongs to.
Session Type Indicates if the session is configured for trunking or
PRI backhaul.
Session Priority When a session fails, it indicates which session the
session manager should try to bring active. A lower
number means higher priority.
Local Port Number Port number of gateway (VISM-PR) for this session.
The port number should be unique across other
sessions and XGCP/SRCP.
Remote Port Number Port number of MGC for this session. The port number
should be unique across other sessions and
XGCP/SRCP.
Remote VISM IP
Address
IP address of the remote VISM-PR (a mandatory
parameter if the session type is lapd trunking).
Session State State this session is in.
Current Session Indicates which session has received an active message
from MGC.
Local IP Address IP address of gateway (VISM-PR).
Remote IP Address IP addressof the media gateway controller. It is
resolved by using vismSessionGrpMgcNamein
vismSessionGrpTable.
Max Window Size Max size of the receive window in segments, used for
flow control.
Table 6-76 Configuration Center—VISM-PR MG Controller Tab (continued)
Category Field Name Description