User guide

6-171
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Table 6-76 Configuration Center—VISM-PR MG Controller Tab
Category Field Name Description
RUDP Session Set Session Set Number Logical index of this table. Currently only set 1 is used,
and all the signaling channels are implicity mapped to
set 1.
Session Set State Denotes the state the set is in.
Total Session Groups Keeps track of the number of session groups that has
been added to a session set.
Current Active Group Current active group number.
No. Of Failed Switch
Between Groups
Number of failed attempts to switch between session
groups in this set.
No. Of Successful
Switch Between Groups
Number of successful attempts to switch between
session groups in this set.
Fault Tolerant Indicates whether the set configuration is fault tolerant
or not.
RUDP Session
Group
Session Group Number Index for this table. One set can have up to two groups.
Session Set Number Session set number to which this session group
belongs.
MGC Name Name of the media gateway controller, which
corresponds to a domain name under which the MGC
could also be registered in a DNS.
Group State State this session group is in.
Current Active Session Indicates the current session that is open to
communication with the MGC. There is only one
active session per group.
Total No. of Sessions Total number of session that have been added to this
group.
No. of Fail Attempts Number of failed attempts to switch between sessions
in this group.
No. of Success
Attempts
Number of successful attempts to switch between
sessions in this group.