User guide

6-169
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Figure 6-90 Configuration Center—VISM-PR Create RUDP Session Group Window
c.
Complete the fields.
Note Table 6-76 describes fields in the VISM-PR MG Controller tab, RUDP Session Group category.
d. Click Apply to add a session group.
Step 3 Create an ISDN PRI backhaul RUDP session within a specified group:
a. Within the MG Controller tab, choose the RUDP Session option from the Category drop-down
arrow.
b. Click Create. The Create RUDP Session window appears.