User guide

6-168
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Figure 6-89 Configuration Center—VISM-PR Create RUDP Session Set Window
f.
Complete the fields.
Note Table 6-76 describes fields in the VISM-PR MG Controller tab, RUDP Session Set category.
g. Click Apply to add a RUDP session set.
Step 2 Create a session group for a session set and a call agent:
a. Within the MG Controller tab, choose the RUDP Session Group option from the Category
drop-down arrow.
b. Click Create. The Create RUDP Session Group window appears.