User guide

6-165
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Figure 6-88 Configuration Center—VISM-PR SRCP Peer Group Parameters Tab
c.
Complete the fields.
Note Table 6-74 describes fields in the VISM-PR XGCP tab, SRCP Peer Group Parameters category.
d. Click Apply.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Table 6-74 Field Descriptions for the VISM-PR XGCP Tab
Category Field Name Description
XGCP Peers Peer Value of this object is the same as mgcNumber from
MGMIB.
Protocol Number Value of this object is the same as
mgcProtocolNumber from MGMIB.
UDP Port Configures the local UDP port on VISM-PR used by
the SGCP and MGCP protocols to communicate with
the call agent.