User guide

6-164
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Figure 6-87 Configuration Center—VISM-PR SRCP Peers Tab
c.
Complete the fields.
Note Table 6-74 describes fields in the VISM-PR XGCP tab, SRCP Peers category.
d. Click Apply.
Step 8 Configure the SRCP heartbeat interval and maximum UDP size for a specified call agent redundancy
group:
a. Within the XGCP tab, choose the SRCP Peer Group Parameters option from the Category
drop-down arrow.
b. Click on a peer entry, then click Details. The SRCP Peer Group Parameters tab appears.