User guide

6-161
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Figure 6-84 Configuration Center—VISM-PR XGCP Tab, XGCP Enhancement Parameters Category
b.
Configure the fields.
Note Table 6-74 describes fields in the VISM-PR XGCP tab. XGCP Enhancement Parameters
category.
c. Click Apply.
Step 4 Specify the VISM-PR number of retries for a call agent message acknowledgment:
a. Within the XGCP tab, choose the XGCP Parameters option from the Category drop-down arrow
(see Figure 6-83).
b. Configure the Request Retries field.
Note Table 6-74 describes fields in the VISM-PR XGCP tab, XGCP Parameters category.
c. Click Apply.
Step 5 Specify the bearer channel type VISM-PR uses (if one is not specified by the call agent in protocol local
connection options):
a. Click the Media Gateway tab.
b. Choose the Bearer Traffic option from the Category drop-down arrow.