User guide

6-160
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Figure 6-83 Configuration Center—VISM-PR XGCP Tab, XGCP Parameters Category
b.
Configure the Restart in Progress MWD field.
Note Table 6-74 describes fields in the VISM-PR XGCP tab, XGCP Parameters category.
c. Click Apply.
Step 3 Specify the VISM-PR minimum and maximum wait time for a call agent message acknowledgment:
a. Within the XGCP tab, choose the XGCP Enhancement Parameters option from the Category
drop-down arrow.