User guide

6-157
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VISM-PR Cards?
MGC Group
Params
MGC Group Num MGC group number. A group can contain more than
one MGC.
Association State Control Enables or disables sending state change notifications
to the call agent.
State of Association Represents the state of the communication between
the MG and the MGC (call agent) groups.
MGC Group Priority Determines priority among the MGC redundancy
groups within the GW.
MGC Group
Protocols
MGC Group Num MGC group number. A group can have more than one
MGC.
Protocol Number Protocol number.
Persistent Event Policy Determines how the persistent events are notified.
Quarantine Policy Determines the quarantine policy when the call agent
does not explicity specify one.
Signal Events Policy Enables you to provision the way signalled events
from CA are handled by the gateway. This is
configurable on a per MGC redundancy group, per
protocol basis.
Provisional Response Enables or disables sending provisional responses to
the CA when processing a request received from the
CA.
Response ACK Attribute List of transaction IDs that are acknowledged by the
call agent.
Disconnect Procedure Describes whether disconnected procedure has to be
enabled or disabled per protocol per MGC group
configured.
Cancel Graceful Describes whether notification of RSIP cancel
graceful has to be enabled or disabled per protocol per
MGC group configured.
Table 6-73 Field Descriptions for the VISM-PR MG Controller Tab (continued)
Category Field Name Description