User guide

6-155
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Figure 6-80 Configuration Center—VISM-PR Create MGC Group Protocols Window
c.
Complete the fields.
Note Table 6-73 describes fields in the VISM-PR MG Controller tab, MGC Group Protocols category.
d. Click Apply.
Once you have created the MGC group protocol, Cisco MGM automatically adds an SRCP peer. For
details on configuring SRCP peers, see Step 7 in section 6.9.4.3.3 Configuring the Gateway Control
Protocol Port for VISM-PR, page 6-158.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.