User guide

6-154
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Figure 6-79 Configuration Center—VISM-PR MGC Group Params Window
c.
Complete the fields.
Note Table 6-73 describes fields in the VISM-PR MG Controller tab, MGC Group Params category.
d. Click Apply.
Step 8 Associate a call agent redundancy group with a gateway control protocol:
a. Within the MG Controller tab, choose the MGC Group Protocols option from the Category
drop-down arrow.
b. Click Create. The VISM-PR Create MGC Group Protocols window appears.