User guide

6-152
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Figure 6-77 Configuration Center—VISM-PR Create Media Gateway Controllers Window
c.
Complete the fields.
Note Table 6-73 describes fields in the VISM-PR MG Controller tab, Media Gateway Controllers
category.
d. Click Apply.
Step 6 Add the MGC to a redundancy group:
a. Within the MG Controller tab, choose the MGC Group option from the Category drop-down
arrow.
b. Click Create. The VISM-PR Create MGC Group window appears.