User guide

6-150
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
To set up call agents and protocols for VISM-PR, complete the following steps:
Step 1 Configure the domain name server for the external domain name resolution:
a. From the Domain Explorer window, choose Configuration > MGX 8880/8850 MG >
Configuration Center.
b. Under the Elements tab, within the node, double-click the VISM-PR card.
c. Click the Media Gateway tab. The Gateway Capabilities option appears by default in the
Category drop-down arrow (see Figure 6-63).
d. Complete the External DNS Name field.
Note Table 6-65 describes fields in the VISM-PR Media Gateway tab, Gateway Capabilities category.
e. Click Apply.
Step 2 Create a domain name for the call agent:
a. Click the MG Controller tab. The Domain Names option appears by default in the Category
drop-down arrow.
b. Click Create. The VISM-PR Create Domain Names window appears.
Figure 6-75 Configuration Center—VISM-PR Create Domain Names Window
c.
Complete the fields. Note the value of the Resolution Type field.
Note Table 6-73 describes fields in the VISM-PR MG Controller tab, Domain Names category.
d. Click Apply.