User guide

6-144
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
To configure VoIP switching for VISM-PR cards, complete the following steps:
Step 1 (Optional) Configure VoIP parameters—See 6.9.4.1 Configuring VoIP Parameters for VISM-PR, page
6-144.
Step 2 Configure the ATM network—See 6.9.4.2 Configuring the ATM Network for VISM-PR, page 6-146.
Step 3 Configure the call agent interface—See 6.9.4.3 Configuring the Call Agent Interface for VISM-PR,
page 6-146.
Step 4 Configure Time Division Multiplexing (TDM) signaling for CCS—See 6.9.4.4 Configuring TDM
Signaling for CCS on VISM-PR, page 6-173.
Step 5 Add and configure DS0 endpoints on lines—See 6.9.4.5 Adding and Configuring DS0 Endpoints on
Lines, page 6-175.
Step 6 Configure TDM signaling for CAS—See 6.9.4.6 Configuring TDM Signaling for CAS on VISM-PR,
page 6-180.
Step 7 (Optional) Place the VISM-PR card in or out of service—See 6.9.4.7 Placing the VISM-PR Card In or
Out of Service, page 6-183.
6.9.4.1 Configuring VoIP Parameters for VISM-PR
To configure AAL5 PVCs on a VISM-PR card:
Step 1 From the Domain Explorer window, select the node from the Hierarchy pane and choose
Configuration > MGX 8880/8850 MG > Configuration Center. The Configuration window for the
selected node opens.
Step 2 Within the Elements tab, expand the node, then double-click the VISM-PR card.
Step 3 Click the Media Gateway tab.
Step 4 Choose the VoIP Parameters option from the Category drop-down arrow.
Step 5 Complete the fields.
Note Table 6-71 describes fields in the Media Gateway tab, VoIP Parameters option.
Step 6 Click Apply to configure the VoIP parameters.
Table 6-71 Field Descriptions for the VISM-PR Media Gateway Tab, VoIP Parameters Option
Field Name Description
BitMask for TOS
(XGCP)
Provisions the bitmask used for the Type Of Service octet for cells carrying
the control (XGCP) traffic.
BitMask for TOS
(RTP)
Provisions the bitmask used for the Type Of Service octet for cells carrying
VoIP bearer (RTP) traffic.
RTCP Report Interval RTCP report interval (defined in RFC 1889)