User guide

6-142
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Figure 6-70 Configuration Center—VISM-PR Jitter Buffer Window
Step 6
Complete the fields.
Note Table 6-70 describes fields in the VISM-PR Jitter Buffer window.
Step 7 Click Apply to configure the jitter parameters.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Table 6-70 Field Descriptions for the VISM-PR Jitter Buffer Window
Field Name Description
Codec Name Index to this table.
Jitter Delay Mode Provisions the jitter buffer mode to be applied to a call connection. Values
include:
• fixed
• adaptive
• fixedWithTimeStamp
Jitter Initial Delay Defines the jitter buffer size in milliseconds.