User guide

6-126
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
To view a list of all possible CODEC templates on the VISM-PR card:
Step 1 From the Domain Explorer window, choose Configuration > MGX 8880/8850 MG > Configuration
Center.
Step 2 Under the Elements tab, within the node, double-click the VISM-PR card.
Step 3 Click the CODECs tab. The CODECs Supported category appears by default. All supported CODEC
templates are listed in the table.
Note To view and configure VoIP CODECs, see section 6.9.1.3.1 Configuring VoIP CODECs, page
6-127.
For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
To view the current CODEC template in use on the VISM-PR card:
Step 1 From the Domain Explorer window, choose Configuration > MGX 8880/8850 MG > Configuration
Center.
Step 2 Under the Elements tab, within the node, double-click the VISM-PR card.
Step 3 Click the Media Gateway tab. The Gateway Capabilities option appears by default in the Category
drop-down arrow. The Codec Template field lists the number of the current CODEC template in use on
the VISM-PR card.
Figure 6-63 Configuration Center—VISM-PR Media Gateway Tab, Gateway Capabilities Category