User guide

6-125
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VISM-PR Cards?
Step 8 Complete the fields.
Note Table 6-63 describes fields in the VISM-PR Create Resource Partitions window.
Step 9 Click Apply to create the resource partition.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9
6.9.1.3 Viewing VISM-PR CODEC Templates
Viewing VISM-PR CODEC templates in Cisco MGM can be done in two ways:
You can view a list of all possible CODEC templates on the VISM-PR card
or
You can view the current CODEC template being used on the VISM-PR card.
Note To change the CODEC templates, you must use the CLI. For details, refer to the Cisco Voice
Interworking Services (VISM) Configuration Guide & Command Reference, Release 3.3.
Table 6-63 Field Descriptions for the VISM-PR Create Resource Partitions Window
Field Name Description
Logical Port Num Index to this table.
Controller Num Index for the controller using the port. In MGX release 1.0, the value par
should be used.
LCNs Available Number of LCNs available for this controller and this port.
Low End of LCN Low end of reserved LCN. Currently SET is not allowed on this object.
High End of LCN High end of reserved LCN.
Total Ingress BW Percentage of total ingress bandwidth reserved. Since we have only one LCN
for VoIP, the value is 100.
Total Egress BW Percentage of total egress bandwidth reserved. Since we have only one LCN
for VoIP, the value is 100.
Controller Identifier Controller identifier of the PNNI controller.