User guide

6-124
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
6.9.1.2 Creating a Resource Partition for VISM-PR
Step 1 From the Domain Explorer window, choose Configuration > MGX 8880/8850 MG > Configuration
Center.
Step 2 Under the Elements tab, within the node, double-click the VISM-PR card.
Step 3 Click the Port tab to display the entries of the port table.
Step 4 Select the port entry.
Step 5 Click Details.
Step 6 Click the Resource Partition tab to display the resource partition table for VISM-PR.
Step 7 Click Create to display the Create Resource Partitions window.
Figure 6-62 Configuration Center—VISM-PR Create Resource Partitions Window
Table 6-62 Field Descriptions for the VISM-PR Create Port Window
Field Name Description
Port Number Virtual port number for the VISM-PR card.
Port Type Indicates the network port. Value of this object is always set to VoIP.
Port Speed Advertises virtual port bandwidth to the controller, SVC and PVC connection
admission control, and aggregate traffic clipping.
Port State Current state of the port.
Descriptor Port descriptor.