User guide

6-117
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure RPM Cards?
6.8.1 Creating a Resource Partition for RPM
Step 1 From the Domain Explorer window, choose Configuration > MGX 8880/8850 MG > Configuration
Center.
Step 2 Under the Elements tab, within the node, double-click the RPM card.
Step 3 Click the Resource Partitions tab.
Step 4 Click Create. The Create Resource Partitions window appears.
Figure 6-57 Configuration Center—RPM Create Resource Partitions Window
Step 5
Configure the fields.
Note Table 6-60 describes fields in the RPM Create Resource Partitions window.
Step 6 Click Apply to create the resource partition.
Table 6-60 Field Descriptions for the RPM Create Resource Partitions Window
Field Name Description
Partition Type
(RPM-PR only)
Partition type, can be VCC or VPC.
Resource Partition ID Value for the resource partition identifier. The range is from 1-10. The value
1 is reserved for PNNI.