User guide

6-116
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure RPM Cards?
6.8 How Do I Configure RPM Cards?
Figure 6-56 Process for Configuring RPM Cards
To configure RPM-PR or RPM-XF cards, complete the following steps:
Step 1 Create a resource partition—See 6.8.1 Creating a Resource Partition for RPM, page 6-117.
Step 2 Create an ATM subinterface—See 6.8.2 Creating or Modifying an ATM Subinterface, page 6-119.
Step 3 (Optional) Save the run-time configuration—See 6.8.3 Saving the Run-Time Configuration for RPM,
page 6-120.
File Type Announcement file type. Values include:
• dynamic (default)—specifies the dynamic file is removed from the cache
when the age of the file reaches a specified limit or in accordance with a
Least Replaceable Unit (LRU) algorithm when the cache is full.
• permanent—specifies the permanent file is stored in the cache until it is
deliberately deleted.
Aging Time (minutes) Announcement file age in cache, only for dynamic files.
Table 6-59 Field Descriptions for the VXSM Voice Features Tab, Announcement Files Category
(continued)
Field Name Description
130007
Create a resource
partition
Create an ATM
subinterface
(Optional)
Save the runtime
configuration