User guide

6-105
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VXSM Cards?
Figure 6-51 Configuration Center—VXSM Create Session Group Window
Step 6
Complete the fields.
Note Table 6-53 describes fields in the VXSM Create Session Group window.
Step 7 Click Apply to add a MGC session group.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Table 6-53 Field Descriptions for the VXSM Create Session Group Window
Field Name Description
Session Group
Number
Index for this table. One set can have up to two groups.
Session Set Number Session set number to which this session group belongs.
MGC Name Denotes the name of the media gateway controller. This corresponds to a
domain name under which the MGC could also be registered in a DNS.
Group State State the session group is in.
Current Active
Session
Indicates the current session that is open to communication with the MGC.
There is only one action session per session group.
Total Number of
Sessions
Keeps track of the total number of sessions that have been added to this group.