User guide

6-104
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VXSM Cards?
Step 6 Complete the fields.
Note Table 6-52 describes fields in the VXSM Create Session Set window.
Step 7 Click Apply to add a MGC session set.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
6.7.7.1.2 Creating a MGC Session Group
Step 1 From the Domain Explorer window, select the node from the Hierarchy pane and choose
Configuration > MGX 8880/8850 MG > Configuration Center. The Configuration window for the
selected node opens.
Step 2 Within the Elements tab, expand the node, then double-click the VXSM card that contains the
connection you created.
Step 3 Click the MG Controller tab.
Step 4 Choose the Session Group option from the Category drop-down arrow.
Step 5 Click Create to display the Create Session Group window.
Table 6-52 Field Descriptions for the VXSM Create Session Set Window
Field Name Description
Session Set Number Logical index of this table. Currently only set 1 is used and all the signalling
channels are implicitly mapped to set 1.
Session Set State Denotes the state this set is in.
Total Session Groups Keeps track of the number of session groups that has been added to a session
set.
Current Active Group Current active group number.
Number of Failed
Switch Between
Groups
Keeps track of failed attempts to switch between session groups in this set.
Number of Successful
Switch Between
Groups
Keeps track of successful attempts to switch between session groups in this
set.
Fault Tolerant Indicates whether the set configuration is fault tolerant or not.