User guide

6-103
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VXSM Cards?
To proceed with the creation of a RUDP session, complete the following steps:
Step 1 Create a MGC session set—See 6.7.7.1.1 Creating a MGC Session Set, page 6-103.
Step 2 Create a MGC session group—See 6.7.7.1.2 Creating a MGC Session Group, page 6-104.
Step 3 Create a RUDP session—See 6.7.7.1.3 Creating a RUDP Session, page 6-106.
6.7.7.1.1 Creating a MGC Session Set
Step 1 From the Domain Explorer window, select the node from the Hierarchy pane and choose
Configuration > MGX 8880/8850 MG > Configuration Center. The Configuration window for the
selected node opens.
Step 2 Within the Elements tab, expand the node, then double-click the VXSM card that contains the
connection you created.
Step 3 Click the MG Controller tab.
Step 4 Choose the Session Set option from the Category drop-down arrow.
Step 5 Click Create to display the Create Session Set window.
Figure 6-50 Configuration Center—VXSM Create Session Set Window