User guide

6-102
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VXSM Cards?
6.7.7.1 Creating a RUDP Session
Figure 6-49 Process for Creating a RUDP Session
Before you can create a RUDP session, be sure you have completed the following steps:
Step 1 Create a resource partition on the node—See 6.7.1 Creating a Resource Partition for VXSM, page 6-63.
Step 2 Create an AAL5+control VXSM connection—See Chapter 7, “Provisioning Connections.”
Step 3 Create and assign an IP address for the connection—See 6.7.3 Creating and Assigning an IP Address
for the Connection, page 6-66.
Step 4 Create an MGC domain name—See 6.7.6.1 Setting Up MGCs and MGC Groups, page 6-79.
Step 5 Create an MGC IP address—See 6.7.6.1 Setting Up MGCs and MGC Groups, page 6-79.
130008
Create a
resource partition
Create AAL5+control
connections
Create and assign an IP
address for the connection
Create a
MGC session set
Create a MGC session
g
rou
p
Create a
RUDP session
1. Prerequisites: 2. To create a RUDP session
Create an MGC domain
name
Create an
MGC IP address