User guide

6-99
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter 6 Configuring Hardware
How Do I Configure VXSM Cards?
Figure 6-48 Configuration Center—VXSM Create XGCP Call Control Profile Window
Step 6
Configure the fields.
Note Table 6-51 describes fields in the VXSM Create XGCP Call Control Profile window.
Step 7 Click Apply to create the XGCP (TGCP) call control profile.
Note For a description of all buttons within this tab, see section 6.2.3 Navigating Within Tables, page
6-9.
Table 6-51 Field Descriptions for the VXSM Create XGCP Call Control Profile Window
Field Name Description
Profile Index Uniquely identifies the call control profile.
Profile Name Unique name for the profile. This cannot be modified once it is created.
Total VIFs Associated Total number of voice interfaces (DS0 group) associated with this call control
profile. A value of zero means there are no voice interfaces associated with
the profile.
Protocol Index Specifies the protocol that the MG should use to communicate with the MGC
during call setup.
Suspicious Error
Threshold
Contains the suspicious error threshold for signaling messages.